Productsclassification
G300
back
G300 Series-Mini Inverter
IGBT type & Compact size design,
small Appearance, easy to operate
IGBT type & Compact size design,
small Appearance, easy to operate
Product specification
| Items | G300 | |
| Power | Rated voltage, Frequency | |
| Supply | One-phase/Three-phase AC 220V 50/60Hz | |
| Voltage Range | ||
| 220V: 170~240V | ||
| Output | Voltage Range | 220V: 0~220V |
| Frequency Range | 0.10~400.00Hz | |
| Control method | V/F control, Space vector control. | |
| Indication | Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on. | |
| Control SpeciAlations | Output Frequency | 0.10Hz~400.00Hz |
| Range | ||
| Frequency Setting | Digital input: 0.01Hz, analog input: 0.1% of | |
| Resolution | maximum output frequency | |
| Output Frequency | 0.01Hz | |
| Accuracy | ||
| V/F Control | Setting V/F curve to satisfy various load | |
| Requirements. | ||
| Torque | Auto increase: auto raise torque by loading | |
| Control | Condition; Manual increase: enable to set | |
| 0.0~20.0% of raising torque. | ||
| Multifunctional | Four multi-function input terminals, realizing | |
| Input Terminal | functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions | |
| Multifunctional | 1 multi-function output terminals for displaying | |
| Output Terminal | of running, zero speed, counter, external | |
| abnormity, program operation and other | ||
| Information and warnings. | ||
| Acceleration/ deceleration Time Setting | 0~999.9s acceleration/deceleration time can be set individually. | |
| Other functions | PID Control | Built-in PID control |
| RS485 | Standard RS485 communication function(MODBUS) | |
| Frequency Setting | Analog input: 0 to 10 V, 0 to 20mA can be | |
| selected; | ||
| Digital input:Input using the setting dial of the | ||
| operation panel or RS485 or UP/DOWN. | ||
| Note:AVI terminals can be used to select an | ||
| analog voltage input(AV) and analog current | ||
| input(AI) through the switch J2. | ||
| Note: AVI terminals can be used to select an | ||
| Analog voltage input (AV) and analog current | ||
| Input(AI) through the switch J2. | ||
| Multi-speed | Four multifunction input terminals, 15 section | |
| speed can be set | ||
| Automatic | Automatic voltage regulation function can be | |
| voltage ID ControlliAlation regulation | Selected | |
| Counter | Built-in 2 group of counters | |
| Protection/Warning Function | Overload | 150%, 60 second(Constant torque) |
| Over Voltage | Over voltage protection can be set. | |
| Under Voltage | Under voltage protection can be set | |
| Other Protections | Overheat,output short circuit,over current, and | |
| Parameter lock and so on. | ||
| Environment | Ambient Temperature | -10℃ to 40℃(non-freezing) |
| Ambient Humidity | Max. 95% (non-condensing) | |
| Altitude | Lower than 1000m | |
| Vibration | Max.0.5G | |
| Structure | Cooling Mode | Forced air cooling |
| Protective | IP 20 | |
| Structure | ||
| Installation | Mode | Wall-mounted or standard 35MM rail mounting |
