Items

S800E

Power

Supply

Rated voltage, Frequency

One-phase/Three-phase AC 220V/380V  50/60Hz

Voltage Range

220V:170V~240V  380V:330~440V

Output

Voltage Range

220V:0~220V 380V:0~380V

Frequency Range

0.10~400.00Hz

Control method

V/F control, Space vector control.

Indication

Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on.

Control   SpeciAlations

Output Frequency

Range

0.10Hz~400.00Hz

Frequency Setting

Resolution

Digital input: 0.01Hz, analog input: 0.1% of

maximum output frequency

Output Frequency

Accuracy

0.01Hz

V/F Control

Setting V/F curve to satisfy various load

Requirements.

Torque

Control

Auto increase: auto raise torque by loading

Condition; Manual increase: enable to set

0.0~20.0% of raising torque.

Multifunctional

Input Terminal

Four multi-function input terminals, realizing

functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions

Multifunctional

Output Terminal

1 multi-function output terminals for displaying

of running, zero speed, counter, external

abnormity, program operation and other

Information and warnings.

Acceleration/ deceleration Time Setting

0~999.9s acceleration/deceleration time can be set individually.

Other       functions

PID Control

Built-in PID control

RS485

Standard RS485 communication function(MODBUS)

Frequency Setting

Analog input: 0 to 10 V, 0 to 20mA can be

selected;

Digital input:Input using the setting dial of the

operation panel or RS485 or UP/DOWN.

Note:AVI terminals can be used to select an

analog voltage input(AV) and analog current

input(AI) through the switch J2.

Note: AVI terminals can be used to select an

Analog voltage input (AV) and analog current

Input(AI) through the switch J2.

Multi-speed

Four multifunction input terminals, 15 section

speed can be set

Automatic

voltage ID ControlliAlation  regulation

Automatic voltage regulation function can be

Selected

Counter

Built-in 2 group of counters

Protection/Warning       Function

Overload

150%, 60 second(Constant torque)

Over Voltage

Over voltage protection can be set.

Under Voltage

Under voltage protection can be set

Other Protections

Overheat,output short circuit,over current, and

Parameter lock and so on.

   Environment

Ambient Temperature

-10℃ to 40℃(non-freezing)

Ambient Humidity

Max. 95% (non-condensing)

Altitude

Lower than 1000m

Vibration

Max.0.5G

Structure

Cooling Mode

Forced air cooling

Protective

Structure

IP 20

Installation

Mode

Wall-mounted or standard 35MM rail mounting